39件ヒット
[1-39件を表示]
(0.412秒)
検索結果
先頭5件
-
Thread
# report _ on _ exception -> bool (33438.0) -
真の場合、そのスレッドが例外によって終了した時に、その内容を $stderr に報告します。
...tderr に報告します。
デフォルトはスレッド作成時の Thread.report_on_exception です。
@param newstate スレッド実行中に例外発生した場合、その内容を報告するかどうかを true か false で指定します。
//emlist[例][ruby]{
a = Thread.new{ Threa......stop; raise }
a.report_on_exception = true
a.report_on_exception # => true
a.run
# => #<Thread:0x00007fc3f48c7908@(irb):1 run> terminated with exception (report_on_exception is true):
# Traceback (most recent call last):
# (irb):1:in `block in irb_binding': unhandled exception
# #<Thread:......0x00007fc3f48c7908@(irb):1 dead>
b = Thread.new{ Thread.stop; raise }
b.report_on_exception = false
b.run # => #<Thread:0x00007fc3f48aefc0@(irb):4 dead>
//}
@see Thread.report_on_exception... -
Thread
. report _ on _ exception -> bool (33432.0) -
真の時は、いずれかのスレッドが例外によって終了した時に、その内容を $stderr に報告します。
...を $stderr に報告します。
デフォルトは false です。
Thread.new { 1.times { raise } }
は $stderr に以下のように出力します:
#<Thread:...> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
2: from -e:1:in `block......in <main>'
1: from -e:1:in `times'
これによってスレッドのエラーを早期に捕捉できるようになります。
いくつかのケースでは、この出力を望まないかもしれません。
出力を抑制するには複数の方法があります:
* 例外が......場所で rescue して、
その例外でスレッドが終了しないようにするのがより良い方法です。
* Thread#join や Thread#value でそのスレッドの終了を待つことが保証できるなら、
スレッド開始時に Thread.current.report_on_exception = false......容を $stderr に報告します。
デフォルトは true です。
Thread.new { 1.times { raise } }
は $stderr に以下のように出力します:
#<Thread:...> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
2: from -e:1:in `blo......ck in <main>'
1: from -e:1:in `times'
これによってスレッドのエラーを早期に捕捉できるようになります。
いくつかのケースでは、この出力を望まないかもしれません。
出力を抑制するには複数の方法があります:
* 例外が... -
Thread
. report _ on _ exception=(newstate) (21332.0) -
真の時は、いずれかのスレッドが例外によって終了した時に、その内容を $stderr に報告します。
...を $stderr に報告します。
デフォルトは false です。
Thread.new { 1.times { raise } }
は $stderr に以下のように出力します:
#<Thread:...> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
2: from -e:1:in `block......in <main>'
1: from -e:1:in `times'
これによってスレッドのエラーを早期に捕捉できるようになります。
いくつかのケースでは、この出力を望まないかもしれません。
出力を抑制するには複数の方法があります:
* 例外が......場所で rescue して、
その例外でスレッドが終了しないようにするのがより良い方法です。
* Thread#join や Thread#value でそのスレッドの終了を待つことが保証できるなら、
スレッド開始時に Thread.current.report_on_exception = false......容を $stderr に報告します。
デフォルトは true です。
Thread.new { 1.times { raise } }
は $stderr に以下のように出力します:
#<Thread:...> terminated with exception (report_on_exception is true):
Traceback (most recent call last):
2: from -e:1:in `blo......ck in <main>'
1: from -e:1:in `times'
これによってスレッドのエラーを早期に捕捉できるようになります。
いくつかのケースでは、この出力を望まないかもしれません。
出力を抑制するには複数の方法があります:
* 例外が... -
NEWS for Ruby 2
. 5 . 0 (3156.0) -
NEWS for Ruby 2.5.0 このドキュメントは前回リリース以降のバグ修正を除くユーザーに影響のある機能の変更のリストです。
...NEWS for Ruby 2.5.0
このドキュメントは前回リリース以降のバグ修正を除くユーザーに影響のある機能の変更のリストです。
それぞれのエントリーは参照情報があるため短いです。
十分な情報と共に書かれた全ての変更のリス......トは ChangeLog ファイルか bugs.ruby-lang.org の issue を参照してください。
== 2.4.0 以降の変更
=== 言語仕様の変更
* トップレベルの定数参照を削除しました 11547
* do/end ブロック内部で rescue/else/ensure を書けるようになりまし......クラスの更新
* Array
* Array#append を追加 12746
* Array#prepend を追加 12746
* Data
* 非推奨になりました。C拡張のベースクラスでしたが、Rubyレベルに公開するのをやめました。3072
* Exception
* Exception#full_message を追加... -
NEWS for Ruby 2
. 4 . 0 (3114.0) -
NEWS for Ruby 2.4.0 このドキュメントは前回リリース以降のバグ修正を除くユーザーに影響のある機能の変更のリストです。
...NEWS for Ruby 2.4.0
このドキュメントは前回リリース以降のバグ修正を除くユーザーに影響のある機能の変更のリストです。
それぞれのエントリーは参照情報があるため短いです。
十分な情報と共に書かれた全ての変更のリス......hangeLog ファイルか bugs.ruby-lang.org の issue を参照してください。
== 2.3.0 以降の変更
=== 言語仕様の変更
* 条件式での多重代入ができるようになりました 10617
* Symbol#to_proc でメソッド呼び出し元での Refinements が有効になり......ッドです。
* Integer#round は half というキーワード引数を受け付けるようになりました。
half には :even, :up, :down が指定可能です。 12548 12958 12953
* IO
* IO#gets, IO#readline, IO#each_line, IO#readlines, IO.foreach は
chomp という...