5件ヒット
[1-5件を表示]
(0.059秒)
別のキーワード
検索結果
先頭5件
-
IO
. binread(path , length = nil , offset = 0) -> String | nil (307.0) -
path で指定したファイルを open し、offset の所まで seek し、 length バイト読み込みます。
...ist[例][ruby]{
IO.write("testfile", "This is line one\nThis is line two\nThis is line three\nAnd so on...\n")
IO.binread("testfile") # => "This is line one\nThis is line two\nThis is line three\nAnd so on...\n"
IO.binread("testfile", 20) # => "This is line one\nThi"
IO.binread("test......file", 20, 10) # => "ne one\nThis is line "
//}
@see IO.read... -
IO
. binwrite(path , string , offset=nil) -> Integer (307.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...書き込み、
閉じます。
ファイルを開くときの mode が "rb:ASCII-8BIT" で、バイナリモードが有効
である点以外は IO.write と同じです。
Kernel.#open と同様 path の先頭が "|" ならば、"|" に続くコマンドを実行し、コマンドの出力を......89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 44 52
# binwriteを使用した場合: どの環境でも正しく保存できる。
IO.binwrite('white.binmode.png', png)
puts IO.binread('white.binmode.png', 16).unpack('C*').map {|c| '%02x' % c }.join(' ')
# => 89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 4......。
IO.write('white.txtmode.png', png)
puts IO.binread('white.txtmode.png', 16).unpack('C*').map {|c| '%02x' % c }.join(' ')
# => 89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 44 52 (Linux/Macの場合
# => 89 50 4e 47 0d 0d 0a 1a 0d 0a 00 00 00 0d 49 48 (Windowsの場合
//}
@see c:IO#io_binmode, IO.w... -
IO
. copy _ stream(src , dst , copy _ length , src _ offset) -> Integer (307.0) -
指定された src から dst へコピーします。 コピーしたバイト数を返します。
...指定された src から dst へコピーします。
コピーしたバイト数を返します。
コピー元の src が IO オブジェクトの場合は、src のオフセットから
ファイル名の場合はファイルの最初からコピーを開始します。
コピー先の dst......す。
src が IO オブジェクトでかつ src_offset が指定されている場合、
src のオフセット(src.pos)は変更されません。
@param src コピー元となる IO オブジェクトかファイル名を指定します。
@param dst コピー先となる IO オブジェク......数値で指定します。
//emlist[例][ruby]{
IO.write("filetest", "abcdefghij")
IO.copy_stream("filetest", "filecopy", 2) # => 2
IO.read("filecopy") # => "ab"
IO.copy_stream("filetest", "filecopy", 3, 4) # => 3
IO.read("filecopy") # => "e... -
IO
. read(path , length = nil , offset = 0 , **opt) -> String | nil (307.0) -
path で指定されたファイルを offset 位置から length バイト分読み込んで返します。
...場合は nil を返します。ただし、length に nil か 0 が指定されている場合は、空文字列 "" を返します。例えば、IO.read(空ファイル) は "" を返します。
引数 length が指定された場合はバイナリ読み込みメソッド、そうでない場合......e
IO.open のモードを指定します。
"r" で始まる文字列である必要があります。
: :open_args
IO.open に渡される引数を配列で指定します。
これらの他、 :external_encoding など
IO.open のオプション引数が指定できます。
@see IO.......binread
例:
IO.read(empty_file) #=> ""
IO.read(empty_file, 1) #=> nil
IO.read(one_byte_file, 0, 10) #=> ""
IO.read(one_byte_file, nil, 10) #=> ""
IO.read(one_byte_file, 1, 10) #=> nil... -
IO
. write(path , string , offset=nil , **opts) -> Integer (307.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...キーワード引数はファイルを開くときに使われ、エンコーディングなどを指定することができます。
詳しくは IO.open を見てください。
@param path ファイル名文字列
@param string 書き込む文字列
@param offset 書き込み開始位置
@par......s line three\nAnd so on...\n"
IO.write("testfile", text) # => 66
IO.write("testfile", "0123456789", 20) #=> 10
IO.read("testfile")
# => "This is line one\nThi0123456789two\nThis is line three\nAnd so on...\n"
IO.write("testfile", "0123456789") #=> 10
IO.read("testfile")......# => "0123456789"
//}
@see IO.binwrite...