クラス
- Pathname (23)
検索結果
先頭5件
-
Pathname
# realpath(basedir = nil) -> Pathname (367.0) -
余計な "."、".." や "/" を取り除いた新しい Pathname オブジェクトを返します。
...余計な "."、".." や "/" を取り除いた新しい Pathname オブジェクトを返します。
また、ファイルシステムをアクセスし、実際に存在するパスを返します。
シンボリックリンクも解決されます。
self が指すパスが存在しない場......す。
//emlist[例][ruby]{
require 'pathname'
Dir.rmdir("/tmp/foo") rescue nil
File.unlink("/tmp/bar/foo") rescue nil
Dir.rmdir("/tmp/bar") rescue nil
Dir.mkdir("/tmp/foo")
Dir.mkdir("/tmp/bar")
File.symlink("../foo", "/tmp/bar/foo")
path = Pathname.new("bar/././//foo/../bar")
Dir.chd......ir("/tmp")
p path.realpath
# => ruby 1.8.0 (2003-10-10) [i586-linux]
# #<Pathname:/tmp/bar>
//}
@see Pathname#realdirpath, File.realpath... -
Pathname
# <=>(other) -> -1 | 0 | 1 | nil (313.0) -
パス名を比較します。other と同じなら 0 を、ASCII順で self が大きい場合 は正、other が大きい場合は負を返します。大文字小文字は区別されます。 other は Pathname オブジェクトでなければなりません。
...other は Pathname オブジェクトでなければなりません。
パス名の比較は単純にパス文字列の比較によって行われるので、論理的に
同じパスでもパス文字列が違えば異なると判断されます。
@param other 比較対象の Pathname オブジ......ェクトを指定します。
//emlist[例][ruby]{
require 'pathname'
p Pathname.new("foo/bar") <=> Pathname.new("foo/bar")
p Pathname.new("foo/bar") <=> Pathname.new("foo//bar")
p Pathname.new("foo/../foo/bar") <=> Pathname.new("foo/bar")
# => 0
# 1
# -1
//}... -
Pathname
# ascend {|pathname| . . . } -> nil (313.0) -
self のパス名から親方向に辿っていったときの各パス名を新しい Pathname オ ブジェクトとして生成し、ブロックへの引数として渡して実行します。 ブロックを省略した場合は Enumerator を返します。
...い Pathname オ
ブジェクトとして生成し、ブロックへの引数として渡して実行します。
ブロックを省略した場合は Enumerator を返します。
//emlist[例][ruby]{
require 'pathname'
Pathname.new('/path/to/some/file.rb').ascend {|v| p v}
# => #<Pathname:/path/......o/some/file.rb>
# #<Pathname:/path/to/some>
# #<Pathname:/path/to>
# #<Pathname:/path>
# #<Pathname:/>
Pathname.new('path/to/some/file.rb').ascend {|v| p v}
# => #<Pathname:path/to/some/file.rb>
# #<Pathname:path/to/some>
# #<Pathname:path/to>
# #<Pathname:path>
//}
ファイ... -
Pathname
# binread(*args) -> String | nil (313.0) -
IO.binread(self.to_s, *args)と同じです。
...じです。
//emlist[例][ruby]{
require "pathname"
pathname = Pathname("testfile")
pathname.binread # => "This is line one\nThis is line two\nThis is line three\nAnd so on...\n"
pathname.binread(20) # => "This is line one\nThi"
pathname.binread(20, 10) # => "ne one\nThis is lin... -
Pathname
# binwrite(string , offset=nil) -> Integer (313.0) -
IO.binwrite(self.to_s, *args)と同じです。
IO.binwrite(self.to_s, *args)と同じです。
@see IO.binwrite -
Pathname
# descend {|pathname| . . . } -> nil (313.0) -
self のパス名の親から子供へと辿っていったときの各パス名を新しい Pathname オブジェクトとして生成し、ブロックへの引数として渡して実行しま す。 ブロックを省略した場合は Enumerator を返します。
...い
Pathname オブジェクトとして生成し、ブロックへの引数として渡して実行しま
す。
ブロックを省略した場合は Enumerator を返します。
//emlist[例][ruby]{
require 'pathname'
Pathname.new('/path/to/some/file.rb').descend {|v| p v}
# => #<Pathname:/>
#......#<Pathname:/path>
# #<Pathname:/path/to>
# #<Pathname:/path/to/some>
# #<Pathname:/path/to/some/file.rb>
Pathname.new('path/to/some/file.rb').descend {|v| p v}
# => #<Pathname:path>
# #<Pathname:path/to>
# #<Pathname:path/to/some>
# #<Pathname:path/to/some/file.rb>
//}
ファ... -
Pathname
# each _ entry {|pathname| . . . } -> nil (313.0) -
Dir.foreach(self.to_s) {|f| yield Pathname.new(f) } と同じです。
...to_s) {|f| yield Pathname.new(f) } と同じです。
//emlist[例][ruby]{
require "pathname"
Pathname("/usr/local").each_entry {|f| p f }
# => #<Pathname:.>
# => #<Pathname:..>
# => #<Pathname:bin>
# => #<Pathname:etc>
# => #<Pathname:include>
# => #<Pathname:lib>
# => #<Pathname:opt>
//}
@see... -
Pathname
# each _ filename {|v| . . . } -> nil (313.0) -
self のパス名要素毎にブロックを実行します。
...self のパス名要素毎にブロックを実行します。
//emlist[例][ruby]{
require 'pathname'
Pathname.new("/foo/../bar").each_filename {|v| p v}
# => "foo"
# ".."
# "bar"
//}... -
Pathname
# each _ line(*args) {|line| . . . } -> nil (313.0) -
IO.foreach(self.to_s, *args, &block) と同じです。
...t[例][ruby]{
require "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("testfile").each_line
# => #<Enumerator: IO:foreach("testfile")>
//}
//emlist[例 ブロックを指定][ruby]{
require "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("testfile").each_line......uire "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("testfile").each_line(4) {|f| p f }
# => "line"
# => "1\n"
# => "line"
# => "2,\n"
# => "line"
# => "3\n"
//}
//emlist[例 sep を指定][ruby]{
require "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("tes... -
Pathname
# find {|pathname| . . . } -> nil (313.0) -
self 配下のすべてのファイルやディレクトリを 一つずつ引数 pathname に渡してブロックを実行します。
...self 配下のすべてのファイルやディレクトリを
一つずつ引数 pathname に渡してブロックを実行します。
require 'find'
Find.find(self.to_s) {|f| yield Pathname.new(f)}
と同じです。
ブロックを省略した場合は Enumerator を返します。
@see... -
Pathname
# mkpath -> nil (313.0) -
FileUtils.mkpath(self.to_s) と同じです。
FileUtils.mkpath(self.to_s) と同じです。
@see FileUtils.#mkpath -
Pathname
# opendir {|dir| . . . } -> nil (313.0) -
Dir.open(self.to_s, &block) と同じです。
Dir.open(self.to_s, &block) と同じです。
@see Dir.open -
Pathname
# read(*args) -> String | nil (313.0) -
IO.read(self.to_s, *args)と同じです。
IO.read(self.to_s, *args)と同じです。
@see IO.read -
Pathname
# realdirpath(basedir = nil) -> Pathname (313.0) -
Pathname#realpath とほぼ同じで、最後のコンポーネントは実際に 存在しなくてもエラーになりません。
...
Pathname#realpath とほぼ同じで、最後のコンポーネントは実際に
存在しなくてもエラーになりません。
@param basedir ベースディレクトリを指定します。省略するとカレントディレクトリになります。
//emlist[例][ruby]{
require "pathna......me"
path = Pathname("/not_exist")
path.realdirpath # => #<Pathname:/not_exist>
path.realpath # => Errno::ENOENT
# 最後ではないコンポーネント(/not_exist_1)も存在しないのでエラーになる。
path = Pathname("/not_exist_1/not_exist_2")
path.realdirpath # => Errno::ENOENT... -
Pathname
# rmtree -> nil (313.0) -
FileUtils.rm_r(self.to_s) と同じです。
FileUtils.rm_r(self.to_s) と同じです。
@see FileUtils.#rm_r -
Pathname
# write(string , offset=nil , **opts) -> Integer (313.0) -
IO.write(self.to_s, string, offset, **opts)と同じです。
@see IO.write -
Pathname
# realpath -> Pathname (67.0) -
余計な "."、".." や "/" を取り除いた新しい Pathname オブジェクトを返します。
...余計な "."、".." や "/" を取り除いた新しい Pathname オブジェクトを返します。
また、ファイルシステムをアクセスし、実際に存在するパスを返します。
シンボリックリンクも解決されます。
self が指すパスが存在しない場......す。
//emlist[例][ruby]{
require 'pathname'
Dir.rmdir("/tmp/foo") rescue nil
File.unlink("/tmp/bar/foo") rescue nil
Dir.rmdir("/tmp/bar") rescue nil
Dir.mkdir("/tmp/foo")
Dir.mkdir("/tmp/bar")
File.symlink("../foo", "/tmp/bar/foo")
path = Pathname.new("bar/././//foo/../bar")
Dir.chd......ir("/tmp")
p path.realpath
# => ruby 1.8.0 (2003-10-10) [i586-linux]
# #<Pathname:/tmp/bar>
//}
@see Pathname#realdirpath, File.realpath... -
Pathname
# cleanpath(consider _ symlink = false) -> Pathname (64.0) -
余計な "."、".." や "/" を取り除いた新しい Pathname オブジェクトを返します。
...余計な "."、".." や "/" を取り除いた新しい Pathname オブジェクトを返します。
cleanpath は、実際にファイルシステムを参照することなく、文字列操作
だけで処理を行います。
@param consider_symlink 真ならパス要素にシンボリック......題ないように .. を残します。
//emlist[例][ruby]{
require "pathname"
path = Pathname.new("//.././../")
path # => #<Pathname://.././../>
path.cleanpath # => #<Pathname:/>
require 'pathname'
Dir.rmdir("/tmp/foo") rescue nil
File.unlink("/tmp/bar/foo") rescue......nil
Dir.rmdir("/tmp/bar") rescue nil
Dir.mkdir("/tmp/foo")
Dir.mkdir("/tmp/bar")
File.symlink("../foo", "/tmp/bar/foo")
path = Pathname.new("bar/././//foo/../bar")
Dir.chdir("/tmp")
path.cleanpath # => #<Pathname:bar/bar>
path.cleanpath(true) # => #<Pathname:bar/foo/../bar>
//}... -
Pathname
# ascend -> Enumerator (13.0) -
self のパス名から親方向に辿っていったときの各パス名を新しい Pathname オ ブジェクトとして生成し、ブロックへの引数として渡して実行します。 ブロックを省略した場合は Enumerator を返します。
...い Pathname オ
ブジェクトとして生成し、ブロックへの引数として渡して実行します。
ブロックを省略した場合は Enumerator を返します。
//emlist[例][ruby]{
require 'pathname'
Pathname.new('/path/to/some/file.rb').ascend {|v| p v}
# => #<Pathname:/path/......o/some/file.rb>
# #<Pathname:/path/to/some>
# #<Pathname:/path/to>
# #<Pathname:/path>
# #<Pathname:/>
Pathname.new('path/to/some/file.rb').ascend {|v| p v}
# => #<Pathname:path/to/some/file.rb>
# #<Pathname:path/to/some>
# #<Pathname:path/to>
# #<Pathname:path>
//}
ファイ... -
Pathname
# descend -> Enumerator (13.0) -
self のパス名の親から子供へと辿っていったときの各パス名を新しい Pathname オブジェクトとして生成し、ブロックへの引数として渡して実行しま す。 ブロックを省略した場合は Enumerator を返します。
...い
Pathname オブジェクトとして生成し、ブロックへの引数として渡して実行しま
す。
ブロックを省略した場合は Enumerator を返します。
//emlist[例][ruby]{
require 'pathname'
Pathname.new('/path/to/some/file.rb').descend {|v| p v}
# => #<Pathname:/>
#......#<Pathname:/path>
# #<Pathname:/path/to>
# #<Pathname:/path/to/some>
# #<Pathname:/path/to/some/file.rb>
Pathname.new('path/to/some/file.rb').descend {|v| p v}
# => #<Pathname:path>
# #<Pathname:path/to>
# #<Pathname:path/to/some>
# #<Pathname:path/to/some/file.rb>
//}
ファ... -
Pathname
# each _ line(*args) -> Enumerator (13.0) -
IO.foreach(self.to_s, *args, &block) と同じです。
...t[例][ruby]{
require "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("testfile").each_line
# => #<Enumerator: IO:foreach("testfile")>
//}
//emlist[例 ブロックを指定][ruby]{
require "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("testfile").each_line......uire "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("testfile").each_line(4) {|f| p f }
# => "line"
# => "1\n"
# => "line"
# => "2,\n"
# => "line"
# => "3\n"
//}
//emlist[例 sep を指定][ruby]{
require "pathname"
IO.write("testfile", "line1\nline2,\nline3\n")
Pathname("tes... -
Pathname
# find -> Enumerator (13.0) -
self 配下のすべてのファイルやディレクトリを 一つずつ引数 pathname に渡してブロックを実行します。
...self 配下のすべてのファイルやディレクトリを
一つずつ引数 pathname に渡してブロックを実行します。
require 'find'
Find.find(self.to_s) {|f| yield Pathname.new(f)}
と同じです。
ブロックを省略した場合は Enumerator を返します。
@see... -
Pathname
# opendir -> Dir (13.0) -
Dir.open(self.to_s, &block) と同じです。
Dir.open(self.to_s, &block) と同じです。
@see Dir.open