種類
- インスタンスメソッド (132)
- クラス (11)
クラス
- IO (132)
検索結果
先頭5件
-
IO (38410.0)
-
基本的な入出力機能のためのクラスです。
...基本的な入出力機能のためのクラスです。
File::Constants は、File から IO へ移動しました。
===[a:m17n] 多言語化と IO のエンコーディング
IO オブジェクトはエンコーディングを持ちます。
エンコーディングの影響を受けるメ......と受けないメソッドがあります。
影響を受けるメソッドでは、IO のエンコーディングに従い読み込まれた文字列のエンコーディングが決定されます。
また IO のエンコーディングを適切に設定することにより、読み込み時......ないメソッド
IO の読み込みメソッドは2種類存在します。
テキスト読み込みメソッドとバイナリ読み込みメソッドです。
テキスト読み込みメソッドは IO のエンコーディングの影響をうけます。
詳しくは「io_encoding」を参... -
IO
# each _ line(limit , chomp: false) -> Enumerator (36166.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit , chomp: false) {|line| . . . } -> self (36166.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / , chomp: false) -> Enumerator (36166.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / , chomp: false) {|line| . . . } -> self (36166.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit , chomp: false) -> Enumerator (36166.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit , chomp: false) {|line| . . . } -> self (36166.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit) -> Enumerator (36154.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit) {|line| . . . } -> self (36154.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / ) -> Enumerator (36154.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / ) {|line| . . . } -> self (36154.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit) -> Enumerator (36154.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit) {|line| . . . } -> self (36154.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(limit , chomp: false) -> Enumerator (21066.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(limit , chomp: false) {|line| . . . } -> self (21066.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(rs = $ / , chomp: false) -> Enumerator (21066.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno...