別のキーワード
種類
- インスタンスメソッド (22)
- 特異メソッド (8)
ライブラリ
- ビルトイン (30)
検索結果
先頭5件
-
IO
. write(path , string , **opts) -> Integer (117580.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...キーワード引数はファイルを開くときに使われ、エンコーディングなどを指定することができます。
詳しくは IO.open を見てください。
@param path ファイル名文字列
@param string 書き込む文字列
@param offset 書き込み開始位置
@par......s line three\nAnd so on...\n"
IO.write("testfile", text) # => 66
IO.write("testfile", "0123456789", 20) #=> 10
IO.read("testfile")
# => "This is line one\nThi0123456789two\nThis is line three\nAnd so on...\n"
IO.write("testfile", "0123456789") #=> 10
IO.read("testfile")......# => "0123456789"
//}
@see IO.binwrite... -
IO
. write(path , string , offset=nil , **opts) -> Integer (117580.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...キーワード引数はファイルを開くときに使われ、エンコーディングなどを指定することができます。
詳しくは IO.open を見てください。
@param path ファイル名文字列
@param string 書き込む文字列
@param offset 書き込み開始位置
@par......s line three\nAnd so on...\n"
IO.write("testfile", text) # => 66
IO.write("testfile", "0123456789", 20) #=> 10
IO.read("testfile")
# => "This is line one\nThi0123456789two\nThis is line three\nAnd so on...\n"
IO.write("testfile", "0123456789") #=> 10
IO.read("testfile")......# => "0123456789"
//}
@see IO.binwrite... -
IO
. readlines(path , limit , opts={}) -> [String] (81466.0) -
path で指定されたファイルを全て読み込んで、その各行を要素としてもつ配列を返します。
...、ファイルの読み込みに失敗した場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "line1\nline2,\nline3\n")
IO.readlines("testfile") # => ["line1\n", "line2,\n", "line3\n"]
IO.readlines("testfile", ",") # => ["line1\nline2,", "\nline3\n"]
//}... -
IO
. readlines(path , rs = $ / , opts={}) -> [String] (81466.0) -
path で指定されたファイルを全て読み込んで、その各行を要素としてもつ配列を返します。
...、ファイルの読み込みに失敗した場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "line1\nline2,\nline3\n")
IO.readlines("testfile") # => ["line1\n", "line2,\n", "line3\n"]
IO.readlines("testfile", ",") # => ["line1\nline2,", "\nline3\n"]
//}... -
IO
. readlines(path , rs , limit , opts={}) -> [String] (81466.0) -
path で指定されたファイルを全て読み込んで、その各行を要素としてもつ配列を返します。
...、ファイルの読み込みに失敗した場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "line1\nline2,\nline3\n")
IO.readlines("testfile") # => ["line1\n", "line2,\n", "line3\n"]
IO.readlines("testfile", ",") # => ["line1\nline2,", "\nline3\n"]
//}... -
IO
# readlines(limit) -> [String] (81448.0) -
データを全て読み込んで、その各行を要素としてもつ配列を返します。 既に EOF に達していれば空配列 [] を返します。
...します(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例][ruby]{
IO.write("testfile", "line1,\nline2,\nline3,\n")
File.open("testfile") { |f| p f.readlines }......# => ["line1,\n", "line2,\n", "line3,\n"]
File.open("testfile") { |f| p f.readlines(3) } # => ["lin", "e1,", "\n", "lin", "e2,", "\n", "lin", "e3,", "\n"]
File.open("testfile") { |f| p f.readlines(",") } # => ["line1,", "\nline2,", "\nline3,", "\n"]
//}
@see $/, IO#gets... -
IO
# readlines(rs = $ / ) -> [String] (81448.0) -
データを全て読み込んで、その各行を要素としてもつ配列を返します。 既に EOF に達していれば空配列 [] を返します。
...します(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例][ruby]{
IO.write("testfile", "line1,\nline2,\nline3,\n")
File.open("testfile") { |f| p f.readlines }......# => ["line1,\n", "line2,\n", "line3,\n"]
File.open("testfile") { |f| p f.readlines(3) } # => ["lin", "e1,", "\n", "lin", "e2,", "\n", "lin", "e3,", "\n"]
File.open("testfile") { |f| p f.readlines(",") } # => ["line1,", "\nline2,", "\nline3,", "\n"]
//}
@see $/, IO#gets... -
IO
# readlines(rs , limit) -> [String] (81448.0) -
データを全て読み込んで、その各行を要素としてもつ配列を返します。 既に EOF に達していれば空配列 [] を返します。
...します(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例][ruby]{
IO.write("testfile", "line1,\nline2,\nline3,\n")
File.open("testfile") { |f| p f.readlines }......# => ["line1,\n", "line2,\n", "line3,\n"]
File.open("testfile") { |f| p f.readlines(3) } # => ["lin", "e1,", "\n", "lin", "e2,", "\n", "lin", "e3,", "\n"]
File.open("testfile") { |f| p f.readlines(",") } # => ["line1,", "\nline2,", "\nline3,", "\n"]
//}
@see $/, IO#gets... -
IO
# each _ line(limit) {|line| . . . } -> self (73012.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each _ line(rs = $ / ) {|line| . . . } -> self (73012.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each _ line(rs , limit) {|line| . . . } -> self (73012.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each _ line(limit) -> Enumerator (72712.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each _ line(rs = $ / ) -> Enumerator (72712.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each _ line(rs , limit) -> Enumerator (72712.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each(limit) {|line| . . . } -> self (63712.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each(rs = $ / ) {|line| . . . } -> self (63712.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each(rs , limit) {|line| . . . } -> self (63712.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
. foreach(path , rs = $ / ) {|line| . . . } -> nil (63631.0) -
path で指定されたファイルの各行を引数としてブロックを繰り返し実行します。 path のオープンに成功すれば nil を返します。
...][ruby]{
IO.write("testfile", "line1\nline2,\nline3\n")
IO.foreach("testfile") # => #<Enumerator: IO:foreach("testfile")>
IO.foreach("testfile") { |x| print "GOT ", x }
# => GOT line1
# GOT line2,
# GOT line3
//}
//emlist[例:カンマを行の区切りに指定( rs = "," )][ruby]{
IO.write("t......estfile", "line1,line2,line3")
IO.foreach("testfile", ",") { |x| puts "GOT #{x}" }
# => GOT line1,
# GOT line2,
# GOT line3
//}
@see $/... -
IO
# reopen(io) -> self (63517.0) -
自身を指定された io に繋ぎ換えます。
...た io に繋ぎ換えます。
クラスも io に等しくなることに注意してください。
IO#pos, IO#lineno などは指定された io と等しくなります。
@param io 自身を繋ぎ換えたい IO オブジェクトを指定します。
@raise IOError 指定された io が c... -
IO
# each(limit) -> Enumerator (63412.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each(rs = $ / ) -> Enumerator (63412.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
# each(rs , limit) -> Enumerator (63412.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......(パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so o......is is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lin... -
IO
. foreach(path , rs = $ / ) -> Enumerator (63331.0) -
path で指定されたファイルの各行を引数としてブロックを繰り返し実行します。 path のオープンに成功すれば nil を返します。
...][ruby]{
IO.write("testfile", "line1\nline2,\nline3\n")
IO.foreach("testfile") # => #<Enumerator: IO:foreach("testfile")>
IO.foreach("testfile") { |x| print "GOT ", x }
# => GOT line1
# GOT line2,
# GOT line3
//}
//emlist[例:カンマを行の区切りに指定( rs = "," )][ruby]{
IO.write("t......estfile", "line1,line2,line3")
IO.foreach("testfile", ",") { |x| puts "GOT #{x}" }
# => GOT line1,
# GOT line2,
# GOT line3
//}
@see $/... -
IO
. binread(path , length = nil , offset = 0) -> String | nil (63256.0) -
path で指定したファイルを open し、offset の所まで seek し、 length バイト読み込みます。
...ist[例][ruby]{
IO.write("testfile", "This is line one\nThis is line two\nThis is line three\nAnd so on...\n")
IO.binread("testfile") # => "This is line one\nThis is line two\nThis is line three\nAnd so on...\n"
IO.binread("testfile", 20) # => "This is line one\nThi"
IO.binread("test......file", 20, 10) # => "ne one\nThis is line "
//}
@see IO.read... -
IO
# reopen(path) -> self (63247.0) -
path で指定されたファイルにストリームを繋ぎ換えます。
...ぎます。
IO#pos, IO#lineno などはリセットされます。
@param path パスを表す文字列を指定します。
@param mode パスを開く際のモードを文字列で指定します。
@raise Errno::EXXX 失敗した場合に発生します。
//emlist[例][ruby]{
IO.write("test... -
IO
# reopen(path , mode) -> self (63247.0) -
path で指定されたファイルにストリームを繋ぎ換えます。
...ぎます。
IO#pos, IO#lineno などはリセットされます。
@param path パスを表す文字列を指定します。
@param mode パスを開く際のモードを文字列で指定します。
@raise Errno::EXXX 失敗した場合に発生します。
//emlist[例][ruby]{
IO.write("test... -
IO
# pos=(n) (63190.0) -
ファイルポインタを指定位置に移動します。 IO#seek(n, IO::SEEK_SET) と同じです。
...ンタを指定位置に移動します。
IO#seek(n, IO::SEEK_SET) と同じです。
@param n 先頭からのオフセットを整数で指定します。
@raise IOError 既に close されている場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "This is line one\nThis is... -
IO
# pos -> Integer (63076.0) -
ファイルポインタの現在の位置を整数で返します。
...ファイルポインタの現在の位置を整数で返します。
@raise IOError 既に close されている場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "This is line one\n")
File.open("testfile") do |f|
f.pos # => 0
f.gets # => "This is line one\n"
f.pos... -
IO
# stat -> File :: Stat (63076.0) -
ファイルのステータスを含む File::Stat オブジェクトを生成して 返します。
...。
@raise Errno::EXXX ステータスの読み込みに失敗した場合に発生します。
@raise IOError 既に close されていた場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "This is line one\nThis is line two\n")
File.open("testfile") do |f|
s = f.stat
"%o... -
IO
# tell -> Integer (63076.0) -
ファイルポインタの現在の位置を整数で返します。
...ファイルポインタの現在の位置を整数で返します。
@raise IOError 既に close されている場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "This is line one\n")
File.open("testfile") do |f|
f.pos # => 0
f.gets # => "This is line one\n"
f.pos...