種類
- インスタンスメソッド (8)
- 特異メソッド (5)
- 定数 (1)
キーワード
-
SEEK
_ SET (1) - advise (1)
- binread (1)
- binwrite (1)
-
copy
_ stream (1) -
internal
_ encoding (1) - pos= (1)
- read (1)
- seek (1)
-
set
_ encoding (3) - sysseek (1)
- write (1)
検索結果
先頭5件
-
IO
# set _ encoding(enc _ str , **opts) -> self (18337.0) -
IO のエンコーディングを設定します。
...
IO のエンコーディングを設定します。
引数が "A:B" のようにコロンで区切られた文字列の場合は、
A を外部エンコーディング、 B を内部エンコーディングに指定します。
引数が一つで、上のような形式でない場合には、......oding オブジェクトを指定します。
@param int_enc 内部エンコーディングを表す文字列か Encoding オブジェクトを指定します。
@param opts エンコーディング変換のオプション
例:
io = File.open(file)
io.set_encoding("ASCII-8BIT", "EUC-JP")... -
IO
# set _ encoding(ext _ enc) -> self (18337.0) -
IO のエンコーディングを設定します。
...
IO のエンコーディングを設定します。
引数が "A:B" のようにコロンで区切られた文字列の場合は、
A を外部エンコーディング、 B を内部エンコーディングに指定します。
引数が一つで、上のような形式でない場合には、......oding オブジェクトを指定します。
@param int_enc 内部エンコーディングを表す文字列か Encoding オブジェクトを指定します。
@param opts エンコーディング変換のオプション
例:
io = File.open(file)
io.set_encoding("ASCII-8BIT", "EUC-JP")... -
IO
# set _ encoding(ext _ enc , int _ enc , **opts) -> self (18337.0) -
IO のエンコーディングを設定します。
...
IO のエンコーディングを設定します。
引数が "A:B" のようにコロンで区切られた文字列の場合は、
A を外部エンコーディング、 B を内部エンコーディングに指定します。
引数が一つで、上のような形式でない場合には、......oding オブジェクトを指定します。
@param int_enc 内部エンコーディングを表す文字列か Encoding オブジェクトを指定します。
@param opts エンコーディング変換のオプション
例:
io = File.open(file)
io.set_encoding("ASCII-8BIT", "EUC-JP")... -
IO
:: SEEK _ SET -> Integer (18313.0) -
IO#seek を参照してください。
...
IO#seek を参照してください。... -
IO
# seek(offset , whence = IO :: SEEK _ SET) -> 0 (649.0) -
ファイルポインタを whence の位置から offset だけ移動させます。 offset 位置への移動が成功すれば 0 を返します。
...* IO::SEEK_SET: ファイルの先頭から (デフォルト)
* IO::SEEK_CUR: 現在のファイルポインタから
* IO::SEEK_END: ファイルの末尾から
* IO::SEEK_DATA: offset 以降の次にデータがある位置へ(lseek の man ページ参照。Linux 3.1 以降のみ)
* IO::......no::EXXX ファイルポインタの移動に失敗した場合に発生します。
@raise IOError 既に close されていた場合に発生します。
f = File.new("testfile")
f.seek(-13, IO::SEEK_END) #=> 0
f.readline #=> "And so on...\n"
@see IO#sysseek... -
IO
# sysseek(offset , whence = IO :: SEEK _ SET) -> Integer (649.0) -
lseek(2) と同じです。IO#seek では、 IO#sysread, IO#syswrite と併用すると正しく動作しないので代わりにこのメソッドを使います。 位置 offset への移動が成功すれば移動した位置(ファイル先頭からのオフセット)を返します。
...lseek(2) と同じです。IO#seek では、
IO#sysread, IO#syswrite と併用すると正しく動作しないので代わりにこのメソッドを使います。
位置 offset への移動が成功すれば移動した位置(ファイル先頭からのオフセット)を返します。
書き......込み用にバッファリングされた IO に対して実行すると警告が出ます。
File.open("/dev/zero") {|f|
buf = f.read(3)
f.sysseek(0)
}
# => -:3:in `sysseek': sysseek for buffered IO (IOError)
File.open("/dev/null", "w") {|f|
f.print "foo"
f.sysseek(0)......ered IO
@param offset ファイルポインタを移動させるオフセットを整数で指定します。
@param whence 値は以下のいずれかです。
それぞれ代わりに :SET、:CUR、:END、:DATA、:HOLE を指定す
る事も可能です。
* IO::SE... -
IO
# advise(advice , offset=0 , len=0) -> nil (310.0) -
posix_fadvise(2) を呼びだし、 ファイルへのアクセスパターンをOSに知らせます。
...表すシンボル
@param offset パターンを指定するデータの先頭位置
@param len パターンを指定するデータの長さ
@raise IOError ストリームが既に閉じられているときに発生する例外
@raise Errno::EBADF ファイルデスクリプタが不正である... -
IO
. binread(path , length = nil , offset = 0) -> String | nil (310.0) -
path で指定したファイルを open し、offset の所まで seek し、 length バイト読み込みます。
...ist[例][ruby]{
IO.write("testfile", "This is line one\nThis is line two\nThis is line three\nAnd so on...\n")
IO.binread("testfile") # => "This is line one\nThis is line two\nThis is line three\nAnd so on...\n"
IO.binread("testfile", 20) # => "This is line one\nThi"
IO.binread("test......file", 20, 10) # => "ne one\nThis is line "
//}
@see IO.read... -
IO
. binwrite(path , string , offset=nil) -> Integer (310.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...書き込み、
閉じます。
ファイルを開くときの mode が "rb:ASCII-8BIT" で、バイナリモードが有効
である点以外は IO.write と同じです。
Kernel.#open と同様 path の先頭が "|" ならば、"|" に続くコマンドを実行し、コマンドの出力を......89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 44 52
# binwriteを使用した場合: どの環境でも正しく保存できる。
IO.binwrite('white.binmode.png', png)
puts IO.binread('white.binmode.png', 16).unpack('C*').map {|c| '%02x' % c }.join(' ')
# => 89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 4......。
IO.write('white.txtmode.png', png)
puts IO.binread('white.txtmode.png', 16).unpack('C*').map {|c| '%02x' % c }.join(' ')
# => 89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 44 52 (Linux/Macの場合
# => 89 50 4e 47 0d 0d 0a 1a 0d 0a 00 00 00 0d 49 48 (Windowsの場合
//}
@see c:IO#io_binmode, IO.w... -
IO
. copy _ stream(src , dst , copy _ length , src _ offset) -> Integer (310.0) -
指定された src から dst へコピーします。 コピーしたバイト数を返します。
...指定された src から dst へコピーします。
コピーしたバイト数を返します。
コピー元の src が IO オブジェクトの場合は、src のオフセットから
ファイル名の場合はファイルの最初からコピーを開始します。
コピー先の dst......す。
src が IO オブジェクトでかつ src_offset が指定されている場合、
src のオフセット(src.pos)は変更されません。
@param src コピー元となる IO オブジェクトかファイル名を指定します。
@param dst コピー先となる IO オブジェク......数値で指定します。
//emlist[例][ruby]{
IO.write("filetest", "abcdefghij")
IO.copy_stream("filetest", "filecopy", 2) # => 2
IO.read("filecopy") # => "ab"
IO.copy_stream("filetest", "filecopy", 3, 4) # => 3
IO.read("filecopy") # => "e... -
IO
. read(path , length = nil , offset = 0 , **opt) -> String | nil (310.0) -
path で指定されたファイルを offset 位置から length バイト分読み込んで返します。
...場合は nil を返します。ただし、length に nil か 0 が指定されている場合は、空文字列 "" を返します。例えば、IO.read(空ファイル) は "" を返します。
引数 length が指定された場合はバイナリ読み込みメソッド、そうでない場合......e
IO.open のモードを指定します。
"r" で始まる文字列である必要があります。
: :open_args
IO.open に渡される引数を配列で指定します。
これらの他、 :external_encoding など
IO.open のオプション引数が指定できます。
@see IO.......binread
例:
IO.read(empty_file) #=> ""
IO.read(empty_file, 1) #=> nil
IO.read(one_byte_file, 0, 10) #=> ""
IO.read(one_byte_file, nil, 10) #=> ""
IO.read(one_byte_file, 1, 10) #=> nil... -
IO
. write(path , string , offset=nil , **opts) -> Integer (310.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...キーワード引数はファイルを開くときに使われ、エンコーディングなどを指定することができます。
詳しくは IO.open を見てください。
@param path ファイル名文字列
@param string 書き込む文字列
@param offset 書き込み開始位置
@par......s line three\nAnd so on...\n"
IO.write("testfile", text) # => 66
IO.write("testfile", "0123456789", 20) #=> 10
IO.read("testfile")
# => "This is line one\nThi0123456789two\nThis is line three\nAnd so on...\n"
IO.write("testfile", "0123456789") #=> 10
IO.read("testfile")......# => "0123456789"
//}
@see IO.binwrite... -
IO
# pos=(n) (58.0) -
ファイルポインタを指定位置に移動します。 IO#seek(n, IO::SEEK_SET) と同じです。
...ンタを指定位置に移動します。
IO#seek(n, IO::SEEK_SET) と同じです。
@param n 先頭からのオフセットを整数で指定します。
@raise IOError 既に close されている場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "This is line one\nThis is... -
IO
# internal _ encoding -> Encoding | nil (28.0) -
IO の内部エンコーディングを返します。 内部エンコーディングが指定されていない場合は nil を返します。
...
IO の内部エンコーディングを返します。
内部エンコーディングが指定されていない場合は nil を返します。
//emlist[例][ruby]{
IO.write("testfile", "abcde")
File.open("testfile") do |f|
p f.internal_encoding # => nil
f.set_encoding("ASCII-8BIT", "EUC-JP"...