別のキーワード
種類
- 特異メソッド (5)
- インスタンスメソッド (4)
ライブラリ
- ビルトイン (9)
検索結果
先頭5件
-
IO
. read(path , length = nil , offset = 0 , **opt) -> String | nil (1000.0) -
path で指定されたファイルを offset 位置から length バイト分読み込んで返します。
...場合は nil を返します。ただし、length に nil か 0 が指定されている場合は、空文字列 "" を返します。例えば、IO.read(空ファイル) は "" を返します。
引数 length が指定された場合はバイナリ読み込みメソッド、そうでない場合......e
IO.open のモードを指定します。
"r" で始まる文字列である必要があります。
: :open_args
IO.open に渡される引数を配列で指定します。
これらの他、 :external_encoding など
IO.open のオプション引数が指定できます。
@see IO.......binread
例:
IO.read(empty_file) #=> ""
IO.read(empty_file, 1) #=> nil
IO.read(one_byte_file, 0, 10) #=> ""
IO.read(one_byte_file, nil, 10) #=> ""
IO.read(one_byte_file, 1, 10) #=> nil... -
IO
. binread(path , length = nil , offset = 0) -> String | nil (976.0) -
path で指定したファイルを open し、offset の所まで seek し、 length バイト読み込みます。
...ist[例][ruby]{
IO.write("testfile", "This is line one\nThis is line two\nThis is line three\nAnd so on...\n")
IO.binread("testfile") # => "This is line one\nThis is line two\nThis is line three\nAnd so on...\n"
IO.binread("testfile", 20) # => "This is line one\nThi"
IO.binread("test......file", 20, 10) # => "ne one\nThis is line "
//}
@see IO.read... -
IO
# advise(advice , offset=0 , len=0) -> nil (841.0) -
posix_fadvise(2) を呼びだし、 ファイルへのアクセスパターンをOSに知らせます。
...表すシンボル
@param offset パターンを指定するデータの先頭位置
@param len パターンを指定するデータの長さ
@raise IOError ストリームが既に閉じられているときに発生する例外
@raise Errno::EBADF ファイルデスクリプタが不正である... -
IO
# sysseek(offset , whence = IO :: SEEK _ SET) -> Integer (745.0) -
lseek(2) と同じです。IO#seek では、 IO#sysread, IO#syswrite と併用すると正しく動作しないので代わりにこのメソッドを使います。 位置 offset への移動が成功すれば移動した位置(ファイル先頭からのオフセット)を返します。
...lseek(2) と同じです。IO#seek では、
IO#sysread, IO#syswrite と併用すると正しく動作しないので代わりにこのメソッドを使います。
位置 offset への移動が成功すれば移動した位置(ファイル先頭からのオフセット)を返します。
書き......込み用にバッファリングされた IO に対して実行すると警告が出ます。
File.open("/dev/zero") {|f|
buf = f.read(3)
f.sysseek(0)
}
# => -:3:in `sysseek': sysseek for buffered IO (IOError)
File.open("/dev/null", "w") {|f|
f.print "foo"
f.sysseek(0)......ered IO
@param offset ファイルポインタを移動させるオフセットを整数で指定します。
@param whence 値は以下のいずれかです。
それぞれ代わりに :SET、:CUR、:END、:DATA、:HOLE を指定す
る事も可能です。
* IO::SE... -
IO
. binwrite(path , string , offset=nil) -> Integer (733.0) -
path で指定されるファイルを開き、string を書き込み、 閉じます。
...書き込み、
閉じます。
ファイルを開くときの mode が "rb:ASCII-8BIT" で、バイナリモードが有効
である点以外は IO.write と同じです。
Kernel.#open と同様 path の先頭が "|" ならば、"|" に続くコマンドを実行し、コマンドの出力を......89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 44 52
# binwriteを使用した場合: どの環境でも正しく保存できる。
IO.binwrite('white.binmode.png', png)
puts IO.binread('white.binmode.png', 16).unpack('C*').map {|c| '%02x' % c }.join(' ')
# => 89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 4......。
IO.write('white.txtmode.png', png)
puts IO.binread('white.txtmode.png', 16).unpack('C*').map {|c| '%02x' % c }.join(' ')
# => 89 50 4e 47 0d 0a 1a 0a 00 00 00 0d 49 48 44 52 (Linux/Macの場合
# => 89 50 4e 47 0d 0d 0a 1a 0d 0a 00 00 00 0d 49 48 (Windowsの場合
//}
@see c:IO#io_binmode, IO.w... -
IO
# pwrite(string , offset) -> Integer (709.0) -
stringをoffsetの位置にpwrite()システムコールを使って書き込みます。
...みます。
IO#seekとIO#writeの組み合わせと比べて、アトミックな操作に
なるという点が優れていて、複数スレッド/プロセスから同じIOオブジェクトを
様々な位置から読み込むことを許します。
どのユーザー空間のIO層のバッ... -
IO
. read(path , **opt) -> String | nil (700.0) -
path で指定されたファイルを offset 位置から length バイト分読み込んで返します。
...場合は nil を返します。ただし、length に nil か 0 が指定されている場合は、空文字列 "" を返します。例えば、IO.read(空ファイル) は "" を返します。
引数 length が指定された場合はバイナリ読み込みメソッド、そうでない場合......e
IO.open のモードを指定します。
"r" で始まる文字列である必要があります。
: :open_args
IO.open に渡される引数を配列で指定します。
これらの他、 :external_encoding など
IO.open のオプション引数が指定できます。
@see IO.......binread
例:
IO.read(empty_file) #=> ""
IO.read(empty_file, 1) #=> nil
IO.read(one_byte_file, 0, 10) #=> ""
IO.read(one_byte_file, nil, 10) #=> ""
IO.read(one_byte_file, 1, 10) #=> nil... -
IO
. read(path , length = nil , **opt) -> String | nil (700.0) -
path で指定されたファイルを offset 位置から length バイト分読み込んで返します。
...場合は nil を返します。ただし、length に nil か 0 が指定されている場合は、空文字列 "" を返します。例えば、IO.read(空ファイル) は "" を返します。
引数 length が指定された場合はバイナリ読み込みメソッド、そうでない場合......e
IO.open のモードを指定します。
"r" で始まる文字列である必要があります。
: :open_args
IO.open に渡される引数を配列で指定します。
これらの他、 :external_encoding など
IO.open のオプション引数が指定できます。
@see IO.......binread
例:
IO.read(empty_file) #=> ""
IO.read(empty_file, 1) #=> nil
IO.read(one_byte_file, 0, 10) #=> ""
IO.read(one_byte_file, nil, 10) #=> ""
IO.read(one_byte_file, 1, 10) #=> nil... -
IO
# pread(maxlen , offset , outbuf = "") -> string (661.0) -
preadシステムコールを使ってファイルポインタを変更せずに、また現在のファイルポインタに 依存せずにmaxlenバイト読み込みます。
...みます。
IO#seekとIO#readの組み合わせと比べて、アトミックな操作に
なるという点が優れていて、複数スレッド/プロセスから同じIOオブジェクトを
様々な位置から読み込むことを許します。
どのユーザー空間のIO層のバッフ...