キーワード
- clone (11)
- close (11)
-
close
_ read (11) -
close
_ write (11) - closed? (11)
- dup (11)
- each (66)
-
each
_ byte (22) -
each
_ codepoint (22) -
each
_ line (66) -
external
_ encoding (11) - fcntl (11)
- getc (11)
-
internal
_ encoding (11) - pos (11)
- pos= (11)
- pread (7)
- pwrite (7)
- readbyte (11)
- readlines (33)
- reopen (33)
-
set
_ encoding _ by _ bom (5) - stat (11)
- syswrite (11)
- tell (11)
-
write
_ nonblock (11)
検索結果
先頭5件
-
IO
# each(rs , limit , chomp: false) -> Enumerator (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(rs , limit , chomp: false) {|line| . . . } -> self (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit , chomp: false) -> Enumerator (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit , chomp: false) {|line| . . . } -> self (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / , chomp: false) -> Enumerator (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / , chomp: false) {|line| . . . } -> self (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit , chomp: false) -> Enumerator (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit , chomp: false) {|line| . . . } -> self (22.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......各行の末尾から "\n", "\r", または "\r\n" を取り除きます。
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# close -> nil (16.0) -
入出力ポートをクローズします。
...ポートをクローズします。
以後このポートに対して入出力を行うと例外 IOError が発生しま
す。ガーベージコレクトの際にはクローズされていない IO ポートはクロー
ズされます。
self がパイプでプロセスにつながっていれ......e IOError 既に close されていた場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "test")
f = File.open("testfile")
f.read # => "test"
f.close
# f.read # => IOError (すでに close しているので read できない)
//}
@see IO#closed?, IO#close_read, IO#close_write......se Errno::EXXX close に失敗した場合に発生します。
//emlist[例][ruby]{
IO.write("testfile", "test")
f = File.open("testfile")
f.read # => "test"
f.close
# f.read # => IOError (すでに close しているので read できない)
//}
@see IO#closed?, IO#close_read, IO#close_write... -
IO
# each(limit) -> Enumerator (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(limit) {|line| . . . } -> self (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(rs = $ / ) -> Enumerator (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(rs = $ / ) {|line| . . . } -> self (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(rs , limit) -> Enumerator (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each(rs , limit) {|line| . . . } -> self (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit) -> Enumerator (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(limit) {|line| . . . } -> self (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / ) -> Enumerator (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs = $ / ) {|line| . . . } -> self (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno... -
IO
# each _ line(rs , limit) -> Enumerator (16.0) -
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として 与えられたブロックを実行します。
...
IO の現在位置から 1 行ずつ文字列として読み込み、それを引数として
与えられたブロックを実行します。
ブロックが与えられなかった場合は、自身から生成した
Enumerator オブジェクトを返します。
テキスト読み込みメソ......パラグラフモード)。
@param limit 最大の読み込みバイト数
@raise IOError 自身が読み込み用にオープンされていなければ発生します。
//emlist[例: 引数なし][ruby]{
IO.write("testfile", "This is line one,\nThis is line two,\nThis is line three,\nAnd so on......is line three,\n"
# "4: And so on..."
//}
//emlist[例: 行の区切りに半角カンマ、最大読み取りバイト数に 10 を指定][ruby]{
IO.write("testfile", "This is line one,This is line two,This is line three,And so on...")
f = File.new("testfile")
f.each(",", 10) { |line| p "#{f.lineno...